Description
Battery mold (1998): 10 compartments; Compartment dimensions: 8.50m x 3.01m - 9 partition walls at 6to - 2 outer walls at 10to, fixed outer wall standing on the right, - suitable for wall thicknesses: 12cm, 18cm, 20cm were produced, other wall thicknesses are also possible, depending on the base formwork installed. - Only 2 Pipe connections for vaporisation - incl. remote control for the chain-driven flap system for opening and closing - the flap is folded depending on the direction of travel and pressed by hydraulics - Platform with ladder - 4 hydraulic cylinders - 2 electric motors - Synchronized chain with cover for adjusting the partition walls - Switch cabinets with operating unit - Operation without vibrators, as SVB is used - Additional formwork wall on the left-hand fixed outer wall for the installation of an additional battery mold